Hotchkis 1102 Tubular Upper Control Arms, 64-72 GM A-Body, User Manual download pdf

Thank you for your purchase from our new line of GM parts.

Please call us at 877 - 4NO - ROLL if you have any questions

regarding the service or installation of your Hotchkis Performance products.

Raising Vehicle

Jack up the front end of the vehicle and secure with jack stands. Remove both front wheels.

Loosen the Upper Ball Joint Nut

Locate and remove the cotter pin. Loosen the castle nut a couple of turns. DO NOT

REMOVE THE NUT AT THIS TIME.

Installation of Hotchkis Upper Control Arms

Tubular Upper Control Arms

64-72 GM A-Body P/N 1102

70-81 GM F-Body P/N 1106

1 2 3 4 5 6

Thank you for your purchase from our new line of GM parts. Please call us at 877 - 4NO - ROLL if you have any questions regarding the service or i

Page 2

3 Break loose the Ball Joint Stud The ball joint stud is press fitted into the steering upright. In order to break it loose, use a hammer and h

6 Install Hotchkis A-Arms Install the Hotchkis a-arms in the same manner as stock removal. Reuse the stock nuts & bolts for the cross sha

7 Get an Alignment After this installation, you will need to get a professional alignment done. Recommended front alignment specs: Camber:

Page 5

Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to quali

Page 6

OF USE OF THE VEHICLE, DAMAGE TO THE VEHICLE OR COMPONENTS OF THE VEHICLE, ANY OTHER TYPE OF CONSEQUENTIAL DAMAGES, OR OTHER INCIDENTAL OR INDIRECT

No comments

Hotchkis 1102 Tubular Upper Control Arms, 64-72 GM A-Body, User Manual