2003-Up Mitsubishi EVO 8 Thank you for your purchase from our line of Mitsubishi Evo 8 parts. Please call us at (877) 4NO-ROLL if you
repaired or replacement part and contact you for payment. Hotchkis’s Limited warranty requires that any repaired or replaced product will be returned
3. For ease of swaybar removal and installation, you will need to remove the alignment bolt that connects the arm to the frame. Make sure to mark th
4. Use a ratchet and a socket to loosen and remove the rear end links from the sway bar. Retain the hardware for later re-installation.
7. Now your ready to install the bracket in your vehicle. This bolt gets tighten first as seen in this
8. You next step is to install the new Hotchkis Tuning sway bar. Maneuver the bar in over the exhaust. Then pull down the arm you dis
10. Grab the HT bushings and grease the bushing with the provided grease. Place the bracket over the bushing. By using the spacer, attach the sway ba
11. Now reconnect and tighten everything including the alignment bolt and the exhaust. Installation is complete! Hotchkis P/N Item Description
Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to qualify for
Limitation of Warranty This limited warranty is the entire and only warranty for the products and may not be modified or supplemented by any other per
Comments to this Manuals