p Thank you for purchasing our Rear upper control arms. If you have any questions or need assistance on the installation procedure, please fee
HOTCHKIS PERFORMANCE, LLC C/O CUSTOMER SERVICE 8633 Sorensen Avenue SANTA FE SPRINGS, CA 90670 Hotchkis Performance will not accept product returns
+ 1401 / 1402 / 1403 ADJUSTABLE TRAILING ARM MOUNT BRACES 1401 – 78-88 GM A/G-BODY / 1402 – 68-72 GM A-BODY / 1403 – 64-67 GM A-BODY Thank you
5) Using the jack placed under the differential, raise the rear suspension to its approximate ride height. The braces are generally easier to install
8) The brace can now be installed by sliding it over the bolts. The braces connect the upper and lower trailing arm frame mounts as indicated by the
9) Adjust the length of the brace as necessary. Loosen the jamb nut on the brace with 15/16” wrench to allow the head to move. Rotate the head clockw
11) Once the braces are installed, place one drop of Loctite on the trailing arm bolt threads. Tighten the washers and nuts. Torque the nuts to 60 f
Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to quali
This limited warranty is the entire and only warranty for the products and may not be modified or supplemented by any other person or company in any f
Hotchkis Performance will not accept product returns without the RGA number, receipt and the information described above. C.O.D. or collect shipments
Installation of Hotchkis Performance Upper Trailing Arms 1) Remove supplied polyurethane bushing from outer shell. 2) Install new shell i
Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be
This limited warranty is the entire and only warranty for the products and may not be modified or supplemented by any other person or company in any f
that any repaired or replaced product will be returned to the sender excluding the cost of freight. Warranty related inquires should be sent to the f
1301 / 1302 / 1305 / 1306 INSTALLATION INSTRUCTIONS THANK YOU FOR CHOOSING HOTCHKIS PERFORMANCE PRODUCTS Removal of Stock Lower Trailing Arms 1)
9) Place one drop of blue Loctite on clean threads and torque sway bar nuts to 35 ft./lbs. Note: Loctite 10) The holes located on the Hotchkis Perfor
Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to qualify for
This limited warranty is the entire and only warranty for the products and may not be modified or supplemented by any other person or company in any f
Comments to this Manuals