Hotchkis 2260 1968-1974 Nova Sport Sway Bar Set User Manual

68-74 GM X-BODY / NOVA, APOLLO, OMEGA, VENTURA 2260R REAR SPORT SWAY BAR Thank you for your purchase from our line of classic Chevrolet suspen

SANTA FE SPRINGS, CA 90670 Hotchkis Performance will not accept product returns without the RGA number, receipt and the information described above.

3) Use a jack to raise the rear of the vehicle and support it with jack stands. Make certain the rear axle is supported with the vehicle’s load on th

7) Use the shorter length bolts (2-3/4”) from hardware kit #T1712 to attach the triangular bracket to the end links. The larger end of the bracket sh

10) Use the Anti-Seize provided in hardware kit #T1722 to apply a small amount on the u-bolt threads. This will prevent damage to the nylock nuts wh

13) Remove the triangle brackets from the end links. Attach the brackets to the stud plate with the large end of the bracket closest to the ground. Ti

Sway Bar Installation Instructions Thank you for your purchase of this Hotchkis Performance product. Your stabilizer bar set was designed

6F. Using the included white silicon grease, lube the inside of the new 1 ¼” front bushings. NOTE: the grease can be cleaned up with WD-40 7F

Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to qualify f

anyone, is for the sole purpose of identifying them and is not part of the basis of the bargain, and does not constitute a warranty that the products