22417, 22418 & 22418R SWAY BAR SET 2002-UP SUBARU STi Thank you for your purchase from our line of Subaru WRX parts. Please call us at (
Subaru WRX Street Sway Bar kit, Parts List P/N 22418 & 22418R Hotchkis P/N Item DescriptionQuantity Per Kit422820136 1" Subaru Front Sway Ba
Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to qualify fo
does not constitute a warranty that the products will conform to that description. The statements of any salesperson do not constitute part of this l
Hotchkis Performance will not accept product returns without the RGA number, receipt and the information described above. C.O.D. or collect shipments
3) Use a 12mm wrench or socket to remove the four bolts holding the skid plate in place. Retain the hardware and skid plate for later re-installation
5) Unbolt the stock end link from the sway bar on each side. Use a 14mm wrench and a 5mm Allen wrench to remove the nut from the end link. Retain the
7) Use the grease provided to apply a thick coat of grease to the inside of the new bushings and slide the bushings over the bar. Some early models o
9) Rotate the Hotchkis sway bar into position until you can re-connect the end links. For stock end links you should use the 14mm wrench and 5mm Alle
Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation of your Hotchkis products. • This installation wi
4) With the rear sway bar out of the way you can remove the stock frame brackets. Use a 10mm wrench or socket to remove the retaining nut holding the
6) Use the grease pack included to apply a thick coat of grease to the insides of the new sway bar bushings. Then place the bushings over the sway ba
9) Make certain the zerk caps covering the grease fittings are in place. Re-check all hardware for tightness. Re-place the rear wheels and use the ja
Comments to this Manuals