1 of 9 C-5 Corvette Sway Bar Installation P/N 2234 w/ Adjustable Rear Bar Please look at the installation of the factory sway bar package before
2 of 9 ►Do not grease these Bushings. They are designed to be used with out lubrication, they are dry lube impregnated.◄ 4. Place the bushing
3 of 9 7. Tighten the frame mounts using a 15mm socket, wrench and extension. Torque to 35-40 ft-lbs.
4 of 9 Rear Bar Installation 1. Using a 18mm combination wrench and a T-40 torx driver & ratchet, remove the lower end link nut. Use a spray
5 of 9 ►Do not grease these Bushings. They are designed to be used with out lubrication, they are dry lube impregnated.◄ 5. Place the new bushing
6 of 9 12. Re-check the fasteners at about 100 miles to ensure optimal performance of your new sway bar set. BAR ADJUSTING YOUR REAR STABILIZER
7 of 9 Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to qual
8 of 9 Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal o
9 of 9 Did you register the product at www.hotchkis.net or via the mail-in warranty card within 30 days of purchase? Is the product appropria
Comments to this Manuals