Thank you for your purchase from our new line of Audi/VW parts. Please call us at 877 - 4NO - ROLL if you have any questions regarding the service
5R Double Check Hardware Make sure all hardware is fully tightened before driving the vehicle. You are done with the installation. The vehicle
Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to quali
DAMAGE TO THE VEHICLE OR COMPONENTS OF THE VEHICLE, ANY OTHER TYPE OF CONSEQUENTIAL DAMAGES, OR OTHER INCIDENTAL OR INDIRECT DAMAGES. HOTCHKIS’ MA
3F Detach End Links Loosen and remove the lower end link nuts from both sides, and push links aside. 4F Unbolt Sway Bar Bushing Brackets
6F Disconnect Lower Engine Mount Locate and remove lower engine mount that attaches to the subframe. Loosen and remove the bolt that attaches t
8F Drop the Subframe Cradle Loosen and remove the 6 subframe cradle bolts. The cradle will not drop completely since it is still connected to t
9F Remove the Front Sway Bar It’s a tight fit between the subframe and the body, so it will take some patience removing the sway bar. It also h
Fitting points outboard. Straight fitting is shown in pictures for prototyping.
11F Double Check Hardware Make sure all hardware is fully tightened before driving the vehicle. Let’s move to the rear sway bar. 12F Stiffne
2R Detach End Links Loosen and remove the lower end link nuts from both sides, and push links aside. 3R Undo the Sway Bar Bushing Bracket Bolt
4R Reinstall New Hotchkis Bar Repeat steps 2R through 3R in reverse order. Your new Hotchkis bar uses new bushings and brackets. The rear bushi
Comments to this Manuals